Halogen leak detector
Portable Halogen leak detector provides accurate registration flow halogen up to 0.5 grams per year (0.017 ounces per year). The leak detector has a mass of 0.32 kg and is capable of operating from internal battery up to 10 hours.
Due to the minimum dimensions of the channel gas motion, the device provides the response time to the gas stream is less than 0.1 seconds and recovery time flow measurement - less than 1 s. The device does not need time to prepare for the measurements, it is ready for the leak detection immediately after switching on.
* The leak detector can be configured to find any gas.
Freon leak detector is used to detect leaks for the following tasks:
- Maintenance and installation of air conditioners;
- Service equipment containing coolant;
- Service refrigeration units;
- Analysis of potential leakage points of design concepts and materials;
- Checking the integrity of the welds;
- Sensitive testing detachable joints;
- Search for leaks in products containing halogens, without additional charge product gases.
The control method of the probe using a halogen leak detector is based on the scanning surface of the controlled object with particular care checked welded and brazed joints, plug connections, etc. Leakage on the surface of an object near the site of the leak formed a halo of freon, which is captured by moving the probe and recorded by leak detector.
Leak testing using Freon (refrigerant) is widely used in aviation, shipbuilding, instrument and rocket, energy and other industries. The method preferred in controlling leakage of large amounts of branched systems or communications, gas-filled cables and pipelines, resealable systems that can not be evacuated. Especially effective is the use of halogen method for monitoring products in which halogen compounds are used as working (sprays, refrigerators, air conditioners).
While checking the tightness of objects halogen method as test substances most commonly used halogenated hydrocarbons: Freon-12 (SS12A2), Freon-13 (SS1A3), Freon-22 (SNS1F2). Applied as sulfur hexafluoride, carbon tetrachloride, methyl chloride, and other halogenated substance. When testing is most effective liquid Freon-113. In recent years, a new secure ozon layer refrigerant - Freon 134A. Over time, this should replace the freon refrigeration units freon-12.
|
Specifications for freon leak detector |
|
|
Minimum reliably detectable flow of halogens |
0.5 gram per year (0.017 ounces per year) |
|
Response time, s |
<0.1 |
|
Recovery time, s |
<1 |
|
Weight, kg |
0.32 |
|
Battery life, h |
10 |
|
Battery charging time, h |
2 |
|
Overall dimensions, mm |
149x238x55 |
|
The recommended concentration of Freon in the gas mixture for leak detection |
5-100% |
|
Operating temperature range |
0-40 ° C |
|
Storage conditions (temperature and relative humidity) |
from -10 °C to 60 °C, 85% |
|
The length of the probe in the set, mm |
50 and 200 |
|
Packing |
Sealed carrying case for the device |
Handheld Halogen Leak Detector is available in two versions: Standard and Professional.
|
Performance |
Professional |
Standard |
|
The minimum detectable flow of halogens to 0.5 grams per year |
X |
X |
|
Displaying leaks graphically |
X |
X |
|
Quantitative measurement of leakage |
X |
|
|
Save a log of measurements |
X |
|
|
Built-in SD memory card |
X |
X |
|
Setting the threshold level to reject leak |
X |
X |
|
Probe length 50 mm |
X |
X |
|
Probe 200 mm |
X |
|
|
Indication of a leak in the form of vibration |
X |
X |
|
Audible alarm leaks |
X |
X |
|
Digital display |
X |
X |
|
Carrying case for the device |
X |
X |
|
2 additional filter |
X |
|
|
USB Charger |
X |
X |
|
The gases used for leak detection |
All halogens: R-22, R134a, R-404a, R-410a, R-422d, R-507, 1234YF, CFC, HCFC, HFC. |
Freon - one type |
Please contact the company Vactron, and we will tell you details about the features of the use of portable halogen leak detector.